Rendezvous AWD V6-3.6L VIN 7 (2004)
Power Window Switch: Service and Repair
Power Window Switch Replacement - Rear Door
POWER WINDOW SWITCH REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
IMPORTANT: Protect the trim panel at the point of insertion of the flat bladed tool to avoid damaging the door panel.
1. Use a small flat-bladed tool to remove the mounting plate for the power window switch. Insert the tool at the rear of the mounting plate and release
the retainer.
2. Lift the rear of the switch plate.
3. Disconnect the electrical connector.
4. Remove the power window switch from the mounting plate.
