Rendezvous AWD V6-3.6L VIN 7 (2004)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the underhood accessory wiring junction block cover.
2.1.
Release the retaining tabs (1).
2.2.
Remove the underhood accessory wiring junction block cover (2).
3. Disconnect the positive battery cable.
3.1.
Remove the nut (1).
3.2.
Position the positive battery cable (2) aside.