Rendezvous AWD V6-3.6L VIN 7 (2004)
13. Lower the vehicle to allow a floor jack to engage with the frame.
14. Use a floor jack in order to support the frame and powertrain.
15. Remove the right side frame-to-body bolts
16. Use the floor jack to lower the right side of the frame and powertrain to provide clearance to the reservoir.
17. Disconnect the ECM wire harness from the ECM wire harness clip on the reservoir.
18. Remove the power steering pressure pipe/hose from the power steering reservoir bracket.
19. Remove the power steering reservoir mounting stud bolt.
20. Remove the power steering reservoir, reservoir bracket, and both hoses from the vehicle.
21. Disconnect the power steering reservoir outlet hose from the power steering reservoir.
Installation Procedure
1. Connect the power steering reservoir outlet hose to the power steering reservoir.
2. Install the power steering reservoir, reservoir bracket, and both hoses to the vehicle.
