Rendezvous AWD V6-3.6L VIN 7 (2004)
9.
Lift the upper trim cover in order to gain access to the lock cylinder access hole (1).
10.
Insert the Snap-On A173A bent-tip awl (1), or equivalent, with a 2.5 mm (3/32 in) tip and 20 mm (3/4 in) in length, into the access hole of the
ignition lock cylinder.
11.
Turn the ignition lock cylinder to START.
12.
Use the bent tip in order to push down on the ignition lock cylinder retainer.
13.
Release the ignition lock cylinder to the RUN position.
14.
Remove the ignition lock cylinder from the lock cylinder case.
15.
Remove the upper steering column cover.
