Rendezvous AWD V6-3.6L VIN 7 (2004)
8. Install the power steering gear heat shield.
9. Use the utility stand in order to raise the frame and the powertrain.
10. Install the frame rear bolts.
11. Remove the utility stand from the frame.
12. Install the intermediate steering shaft to the steering gear.
13. Connect the tie rod ends to the steering knuckles.
14. Install the stabilizer shaft.
15. Install the front wheels.
16. Lower the vehicle.
17. Bleed the air from the power steering system.
18. Inspect and adjust the toe as necessary.
