Rendezvous AWD V6-3.6L VIN 7 (2004)
6. Remove the bolts (3), extension housing assembly (1), and shim (2) from the transfer case.Reference mark the shim for proper reassembly.
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the extension housing assembly (3) to the J 44755 (2) with M8 x 1.25 bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
8. Remove the flange nut (1).
9. Remove the bolts and the extension housing assembly from the J 44755.
