Rendezvous AWD V6-3.6L VIN 7 (2004)
8. Remove the tape that secures the rear washer hose to the right rear quarter panel area.
9. Remove the rear washer nozzle.
10. Pull the rear washer hose end out through the liftgate rubber conduit.
11. Pull the rear edge of the headliner down to gain access to the rear washer hose.
12. Remove the rear washer hose from inside of the rear roof panel.
13. Remove the rear washer hose from the vehicle.
INSTALLATION PROCEDURE
1. Position the rear washer hose to the inner right side of the vehicle.
2. Route the rear washer hose through the inside of the rear roof panel.
3. Route the rear washer hose through the liftgate rubber conduit.
4. Install the rear washer nozzle.