Rendezvous AWD V6-3.6L VIN 7 (2004)
Wiper Blade: Service and Repair
Wiper Arm Blade Replacement
WIPER ARM BLADE REPLACEMENT
REMOVAL PROCEDURE
1. Turn the ignition switch to the ACCY position.
2. Turn the wiper switch to the DELAY position.
3. Turn the ignition OFF when the wipers are in the innerwipe position and not moving.
4. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
5. Bring the wiper arm out through the opening in the wiper blade.
INSTALLATION PROCEDURE
1. Insert the hook of the wiper arm through the opening in the wiper blade.
