Rendezvous FWD V6-3.4L VIN E (2005)
Speaker: Service and Repair
Front Upper
SPEAKER REPLACEMENT - FRONT UPPER
REMOVAL PROCEDURE
1. Remove the front door trim panel assembly in order to expose the speaker.
2. Remove the speaker screws.
3. Disconnect the wire harness from the speaker.
4. Remove the speaker.
INSTALLATION PROCEDURE
1. Install the speaker to the door trim panel assembly.
Tighten the speaker screws to 3.2 N.m (28 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Connect the wire harness to the speaker.
3. Install the trim panel assembly to the front door.
