Rendezvous FWD V6-3.4L VIN E (2005)
Rear Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Rear (Rendezvous)
Energy Absorber Replacement - Rear (Rendezvous)
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) (See: Rear Bumper Cover / Fascia/Service and
Repair/Fascia Replacement - Rear Bumper (Aztek))Fascia Replacement - Rear Bumper (Rendezvous) (See: Rear Bumper Cover / Fascia/Service
and Repair/Fascia Replacement - Rear Bumper (Rendezvous)) .
2. Remove the rear bumper energy absorber from the rear fascia.
Installation Procedure
1. Install the rear bumper energy absorber to the rear fascia.
2. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) (See: Rear Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Rear Bumper (Aztek))Fascia Replacement - Rear Bumper (Rendezvous) (See: Rear Bumper Cover / Fascia/Service and
Repair/Fascia Replacement - Rear Bumper (Rendezvous)) .