Rendezvous FWD V6-3.4L VIN E (2005)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Open the hood.
2. Remove the windshield wiper arms. Refer to Wiper Arm Replacement in Wiper Washer Systems.
3. Reposition the windshield wiper washer hose from the air inlet grille.
4. Remove the push-in retainers from the air inlet grille, using the J 38778 .
5. Remove the air inlet grille extensions from the air inlet grille at the windshield.
Pull up and out in order to release the retainers on the air inlet grille extensions.