Rendezvous FWD V6-3.4L VIN E (2005)
Hood Latch: Service and Repair
Hood Latch Release Handle
Hood Latch Release Handle Replacement
Removal Procedure
1. Remove the left IP Insulator Panel. Refer to Closeout/Insulator Panel Replacement - Left (See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair) in Instrument Panel, Gauges, and Console.
2. Remove the knee bolster panel. Refer to Knee Bolster Replacement (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair) in Instrument Panel, Gauges, and Console.
3. Remove the bolts from the hood release handle base.
4. Remove the hood release cable from the hood release handle.
5. Remove the hood release handle from the instrument panel.
Installation Procedure
1. Install the hood release cable to the hood release handle.
