buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 7978 > < SIR Disabling and Enabling Zones|Page 7976
Page 2
background image

4. Install the SIR Fuse.
5. Install the console accessory wiring junction block access hole cover. 
6. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
7. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System

Check - Vehicle in Vehicle DTC Information.See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check -
Vehicle

SIR Disabling and Enabling Zones|Page 7978 > < SIR Disabling and Enabling Zones|Page 7976