Rendezvous FWD V6-3.4L VIN E (2005)
Seat Cushion: Removal and Replacement
Seat Cushion Cover Replacement - Front (Aztek)
Seat Cushion Cover Replacement - Front (Aztek)
Removal Procedure
1. Remove the front bucket seat from the vehicle. Refer to Seat Replacement - Bucket (See: Service and Repair/Seat Replacement - Bucket) .
2. Remove the front seat back. Refer to Seat Back Replacement - Front (See: Seat Back/Service and Repair/Removal and Replacement/Seat Back
Replacement - Front) .
3. Remove the front seat adjuster. Refer to Seat Adjuster Replacement - Front (See: Service and Repair/Seat Adjuster Replacement - Front) .
4. Disconnect the electrical connector for the heated seat, if equipped.
5. Remove the J-hook retainers on the front of the front seat cushion cover.
6. Remove the J-hook retainers on the sides of the front seat cushion cover.
7. Remove the J-hook retainers on the rear of the front seat cushion cover.
8. Remove the hook and the loop retainers securing the seat cushion cover to the cushion.