Rendezvous FWD V6-3.4L VIN E (2005)
Power Seat Switch: Removal and Replacement
Seat Switch Replacement - Power
Removal Procedure
1. Remove the outer trim panel from the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (See: Seats/Seat
Cushion/Service and Repair/Removal and Replacement/Seat Cushion Outer Trim Panel Replacement - Front Seat) .
2. Use a small flat-bladed tool to release the retainers which hold the power seat switch to the outer trim panel.
3. Remove the power seat switch from the outer trim panel.
4. Remove the power seat switch harness from the front seat support.
5. Disconnect the electrical connector from the power seat switch.
6. Remove the power seat switch.
Installation Procedure