Rendezvous FWD V6-3.4L VIN E (2005)
Hood Weatherstrip: Service and Repair
Seal Replacement - Plenum to Hood
Seal Replacement - Plenum to Hood
Removal Procedure
1. Open the hood.
2. Remove the push-in retainers from the hood rear weatherstrip.
3. Remove the hood rear weatherstrip from under the air inlet grille.
4. Remove the hood rear weatherstrip from the vehicle.
Installation Procedure
1. Align the hood rear weatherstrip to the holes in the cowl under the air inlet grille.
2. Install the push-in retainers to the hood rear weatherstrip.
3. Close the hood.
