Rendezvous FWD V6-3.4L VIN E (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement - Front
Wheel Speed Sensor Jumper Harness Replacement - Front
Removal Procedure
1. Disconnect the front wheel speed sensor jumper harness to ABS harness connector (8).
2. Raise and support the vehicle on a suitable hoist.
3. Remove the harness (4) from the splash shield retaining clip (5).
4. Remove the harness (4) from the control arm retaining clips (3).
5. Disconnect the front wheel speed jumper harness connector (2) from the front wheel sensor.
6. Remove the front wheel speed sensor jumper harness (1).
Installation Procedure
