Rendezvous FWD V6-3.4L VIN E (2005)
2. Install the park brake actuator lever and wave washer to the brake shoe.
3. Install the horseshoe clip to the park brake actuator lever pivot pin.
4. Install the brake shoes to the brake backing plate.
5. Install the brake shoe hold-down pins, springs and retainers (4) to the brake shoes.
6. Install the park brake cable (6) to the park brake actuator lever.
7. Important: Ensure that the adjuster (2) engages the brake shoe (4) and the park brake actuator (3) properly.
Install the adjuster screw to the brake shoe and the park brake actuator.
8. Apply GM P/N 1052196 (Canadian P/N 5264008) brake lubricant or equivalent to the adjuster actuator/brake shoe interface.
9. Install the adjuster actuator (1) to the brake shoe.
10. Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
Install the straight end of the adjuster spring (3) to the brake shoe.
11. Install the adjuster spring hook end to the tab on the adjuster actuator (1).
12. Install the return spring (7) to the brake shoes.
13. Important: Ensure that the adjuster operates properly.
