Rendezvous FWD V6-3.4L VIN E (2005)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Tools Required
^
J37043 Parking Brake Cable Release Tool
Removal Procedure
1. Remove the left side instrument panel insulator.
2. Pull back the carpet for access.
3. Raise and suitably support the vehicle.
4. Loosen the parking brake cable and the equalizer.
5. Disconnect the front cable from the rear cable at the connector clip.
6. Remove the front cable from the connector clip.
7. Use the J37043 in order to remove the front cable clip from the underbody bracket.
8. Lower the vehicle.
