Rendezvous FWD V6-3.4L VIN E (2005)
1. Install the cooling fan motor.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the screws to the cooling fan motor.
^
Tighten the screws to 6 Nm (53 inch lbs.).
3. Connect the electrical connector to the cooling fan motor.
4. Install the cooling fan to the shroud.
5. Important: Turn the cooling fan nut counterclockwise to tighten.
Install the cooling fan nut.
^
Tighten the nut to 6 Nm (53 inch lbs.).
6. Install the cooling fan and shroud assembly.