Rendezvous FWD V6-3.4L VIN E (2005)
7. Use the utility stand in order to lower the engine.
8. Install the engine mount lower nuts.
^
Tighten the engine mount lower nuts to 47 Nm (35 ft. lbs.).
9. Install the right engine splash shield.
10. Install the right front wheel and tire.
11. Connect the TWC pipe to the engine right side exhaust manifold.
12. Lower the vehicle.
13. Install the engine mount struts.
14. Install the throttle body air inlet duct.
15. Connect the battery ground (negative) cable.
