Rendezvous FWD V6-3.4L VIN E (2005)
Tighten the screws to 1.6 N.m (14 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the left hand air temperature actuator electrical connector.
4. Install the left hand temperature door lever (1) to the left hand temperature door.
IMPORTANT: Align the pin on the left hand air temperature actuator with the slot in the left hand temperature door lever.
5. Connect the left hand temperature door lever spring (2) to the left hand temperature door lever (1) and HVAC module case.
6. Install the left hand temperature door lever bolt (3) to the HVAC module case.
Tighten the bolt to 0.9 N.m (8 lb in).
7. Install the knee bolster.
8. Recalibrate the actuators. Refer to Re-Calibrating Actuators.
