Rendezvous FWD V6-3.4L VIN E (2005)
Throttle Position Sensor: Service and Repair
THROTTLE POSITION (TP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Remove the air intake duct.
3. Disconnect the evaporative emission (EVAP) purge line.
4. Disconnect the fuel lines.
5. Disconnect the throttle position (TP) sensor electrical connector.
6. Remove the 2 TP sensor fasteners.
7. Remove the TP sensor and O-ring.
INSTALLATION PROCEDURE
