Rendezvous FWD V6-3.4L VIN E (2005)
Throttle Body: Service and Repair
Throttle Body Assembly
THROTTLE BODY ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Drain coolant. Refer to Draining and Filling Cooling System in Cooling System.
2. Disconnect the intake air temperature (IAT) sensor electrical connector.
3. Disconnect the breather tube from the air intake tube.
4. Remove the air intake tube.
5. Disconnect the idle air control (IAC) valve electrical connector.
6. Disconnect the throttle position (TP) sensor electrical connector.
7. Remove the accelerator control cable bracket.
