Rendezvous FWD V6-3.4L VIN E (2005)
Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.
2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel.
4. Remove the upper and lower shrouds.
5. Remove the wire harness straps from the steering wheel column wire harness.
6. Remove the inflatable restraint steering wheel module coil (1)from the steering shaft (2).
INSTALLATION PROCEDURE
1. Install the inflatable restraint steering wheel module coil (1) to the steering shaft (2).
2. Center the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Centering in Steering Wheel
and Column.
3. Route the lower coil wire harness along the steering column jacket.
4. Install the wire harness straps to the steering column wire harness.
5. Install the upper and lower shrouds.
6. Install the steering wheel.
7. Install the inflatable restraint steering wheel module.
8. Enable the SIR System. Refer to SIR Disabling and Enabling Zone 3.