Rendezvous FWD V6-3.4L VIN E (2005)
4. Position the sensor on the upper radiator core support (3).
5. Point the arrow on the sensor toward the front of the vehicle.
6. Install the sensor bolts (1).
Tighten the bolts to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
7. Secure the fascia to the radiator support.
8. Install the retainers that hold the upper front bumper fascia to the radiator support.
9. Install the grille.
10. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1.