Rendezvous FWD V6-3.4L VIN E (2005)
Ride Height Sensor: Service and Repair
Automatic Level Control Sensor Replacement
Automatic Level Control Sensor Replacement
Removal Procedure
1. Important:
When replacing the height sensor a diagnostic system check must be performed.
Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the automatic level control sensor electrical connector (1).
3. Remove the automatic level control sensor link from the lower control arm ball stud.
4. Remove the automatic level control height sensor bracket bolts (1).
5. Remove the automatic level control height sensor with the bracket from the vehicle.