Rendezvous FWD V6-3.4L VIN E (2005)
Wheel Hub: Service and Repair
Rear Suspension
Wheel Bearing/Hub Replacement - Rear (Front Wheel Drive/Drum)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake drum.
4. Remove and discard the wheel bearing/hub bolts.
5. Remove the wheel bearing/hub.
6. Disconnect the wheel speed sensor electrical connector (2).
Installation Procedure
1. Connect the wheel speed sensor electrical connector (2).
