Rendezvous FWD V6-3.4L VIN E (2005)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the battery.
2. Drain the washer solvent from the washer solvent container.
3. Disconnect the washer solvent container level sensor electrical connector.
4. Disconnect the rear washer pump electrical connector if equipped.
5. Disconnect the washer hose from the rear washer pump if equipped.
6. Disconnect the front washer pump electrical connector.
7. Disconnect the front washer hose from the front washer pump.
8. Remove the washer solvent container screws.
9. Remove the washer solvent container from the vehicle.
INSTALLATION PROCEDURE
