Rendezvous FWD V6-3.5L VIN L (2006)
Antenna Cable: Service and Repair
Antenna Cable Replacement
ANTENNA CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the radio.
IMPORTANT: These procedures are applicable to both of the antenna cables in this vehicle.
2. Remove the sunshade.
3. Remove the sunshade anchor.
4. Remove the trim panel from the right cowl side.
5. Remove the garnish molding from the windshield.
6. Remove the bolt that secures the antenna cable extension to the roof. This bolt is located under the right front corner of the headliner.
7. Remove the antenna cable from the instrument panel carrier.
8. Remove the following components from the vehicle:
-
The antenna cable
-
The antenna cable extension
INSTALLATION PROCEDURE