Rendezvous FWD V6-3.5L VIN L (2006)
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the fascia upper support.
Tighten the bolts to 5 N.m (44 lb in).
3. Install the bolts to the fascia lower support.
Tighten the bolts to 10 N.m (89 lb in).
4. Connect the headlamp wiring harness to the fascia upper support.
5. Install the hood latch and cable. Refer to Hood Latch Release Cable Replacement (See: Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair) .
6. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper - Upper (Rendezvous) (See: Fascia Replacement - Front Bumper -
Upper (Rendezvous)) .
