Rendezvous FWD V6-3.5L VIN L (2006)
4. Apply modeling clay or body caulking compound to the door lock opening.
Important: Do not close the door all the way.
5. Close the door far enough for the striker to make an impression into the modeling clay or body caulking compound.
6. Open the door and check the door striker impression in the modeling clay or body caulking compound.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Readjust striker and add spacers as required.
Tighten the striker screws to 24 N.m (18 lb ft).
8. Close the door.