Rendezvous FWD V6-3.5L VIN L (2006)
6. With the aid of an assistant, remove the liftgate window from the liftgate.
Place the liftgate window (2) face up on a soft protective cover.
Installation Procedure
1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (See: Windows and
Glass/Windows/Service and Repair) .
2. Connect the rear liftgate window defogger connectors to the right and left sides.
3. Install the center light applique.
4. Install the rear wiper motor. Refer to Wiper Motor Replacement - Rear in Wipers/Washer Systems.
5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
6. Close the liftgate.
