Rendezvous FWD V6-3.5L VIN L (2006)
Arm Rest: Service and Repair
Armrest Replacement - Front Seat
Removal Procedure
1. Remove the armrest bolt trim cap using a small flat-bladed tool.
2. Remove the bolt from the armrest.
3. Remove the armrest from the front bucket seat.
Installation Procedure
1. Position the bolt into the mounting point of the armrest.
2. Position the armrest to the front bucker seat.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Tighten the armrest mounting bolt.
Tighten the armrest mounting bolt to 4.5 N.m (40 lb in).
Important: Rotate the armrest bolt trim cap to a new position to allow the retainer on the cap to seat properly.