Rendezvous FWD V6-3.5L VIN L (2006)
Power Door Lock Actuator: Service and Repair
Lock Actuator Replacement - Rear Door
LOCK ACTUATOR REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the rear door lock.
2. Remove the rear door lock to rear door lock actuator screws.
3. Remove the rear door actuator from the rear door lock.
INSTALLATION PROCEDURE
1. Align the rear door actuator to the rear door lock.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rear door lock to rear door actuator screws.
Tighten the rear door actuator screws to 2 N.m (18 lb in).
3. Install the rear door lock.