Rendezvous FWD V6-3.5L VIN L (2006)
Subject:
Premature Aluminum Panel Hood Corrosion/Blistering (Refinish)
# 01-08-51-004E - (12/22/2006)
Models:
2000-2003 Buick LeSabre
2002-2006 Buick Rendezvous
2000-2005 Cadillac DeVille
2003-2006 Cadillac CTS
2004-2006 Cadillac SRX
2005-2006 Cadillac STS
2006 Cadillac DTS
1997-2005 Chevrolet Trans Sport (Export Only), Venture
1997-2003 Oldsmobile Silhouette
2001-2003 Oldsmobile Aurora
1997-1998 Pontiac Trans Sport
1997-2005 Pontiac Montana
2000-2003 Pontiac Bonneville
This bulletin is being revised to update the affected model years. Please discard Corporate Bulletin Number O1-08-51-004D (Section 08 - Body and
Accessories).
Condition
Some vehicles may have the appearance of blistering or bubbling paint on the top of the hood or under the hood edges and hem flanges.
Correction
Important:
Always follow your paint manufacturer's instructions for specific product usage.
1.
Remove the hood from the vehicle.
2.
Wash the complete hood with soap and water.
3.
Wash the hood with wax and grease remover.
4.
Inspect the hood for paint blistering (top of the hood and under the hood edges and hem flanges).
Important:
Because the hood is made of aluminum only, use clean discs so that the aluminum surface of the hood will not become contaminated with
foreign particles.
5.
Clean blister areas by spot media blast or a 3M(R) Roloc clean and strip disc, P/N 07466, or equivalent.
6.
Feather edge and clean.
7.
Prime the affected area, seal the complete panel perimeter hem flange using 3M # 08370.
8.
Refer to your GM 4901M Approved Refinish Materials booklet under the heading of Rigid Substrates (Steel and Aluminum) for product selection.
The information for the latest GM Approved Refinish Materials booklet is ONLY online at the GM Goodwrench website. Printed books have been
discontinued. Follow these steps to access the site:
^
Go to www.gmgoodwrench.com.
^
Click on GM Collision Parts.
^
Click on GM Technical Repair Information.
^
Click on Paint Shop.
Warranty Information
