Rendezvous FWD V6-3.5L VIN L (2006)
6. Install the hook and the loop retainers securing the seat cushion cover to the cushion, by pressing in place until fully seated.
7. Install the front seat adjuster.
8. Connect the electrical connector for the heated seat, if equipped.
9. Install the front seat back.
10. Install the front bucket seat to the vehicle.
11. Re-zero the passenger presence system. Refer to Passenger Presence System Rezeroing Procedure in Restraint Systems.
CAUTION: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
