Rendezvous FWD V6-3.5L VIN L (2006)
9. Remove the hog rings from the cover.
10. Remove the cover from the front seat cushion.
11. If the cushion is damaged, replace the cushion.
INSTALLATION PROCEDURE
1. Install the replacement heater element over the original heater element. DO NOT remove the original heater element. If this is a second repair,
remove the old replacement heater element from the original and install the new heater element over the original.
2. Install the cover onto the front seat cushion.
3. Install the hog rings to the front seat cushion cover.
4. Install the J-hook retainer on the front of the cover.
5. Install the J-hook retainers on the sides of the cover.
6. Install the J-hook retainer on the rear of the cover.
