Rendezvous FWD V6-3.5L VIN L (2006)
4. Install the bottom half of the caliper piston (2) into the caliper bore.
5. Install the new piston dust boot seal (1) over the caliper piston (2).
6. Compress the caliper piston (2) to the bottom of the caliper bore.
7. Fully seat the piston dust boot seal (1) into caliper counterbore.
8. Install the retaining ring that secures the dust boot to the caliper housing.
9. Install the bleeder valve and cap to the caliper and tighten the valve securely.
10. Install the rear brake caliper to the vehicle.
