Rendezvous FWD V6-3.5L VIN L (2006)
2. Install the park brake cable to the park brake cable bracket.
3. Install the park brake cable to the park brake actuator.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the rear park brake cable retaining nut and bolt.
Tighten to 10 Nm (89 inch lbs.).
5. Install the park brake left side cable to the park brake equalizer.
6. Secure the park brake cable to the rear crossmember with 2 rivets (1).
7. Adjust the park brake cable.
8. Lower the vehicle.
