Rendezvous FWD V6-3.5L VIN L (2006)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screws to the cooling fan motor.
Tighten the screws to 6 Nm (53 inch lbs.).
4. Connect the cooling fan motor electrical connectors.
5. Install the cooling fans to the shroud.
Important: Turn the cooling fan nuts counterclockwise to tighten.
6. Install the cooling fan nuts.
Tighten the nuts to 6 Nm (53 inch lbs.).
7. Install the cooling fan assembly including the shroud.