Rendezvous FWD V6-3.5L VIN L (2006)
Heater Core: Service and Repair
Heater Core Cover Replacement
HEATER CORE COVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right I/P insulator.
2. Remove the left I/P insulator.
3. Remove the I/P compartment.
4. Remove the center floor air outlet.
5. Remove the screws retaining the heater outlet duct.
6. Remove the heater outlet duct.
7. Disconnect the I/P harness to heater core cover tie strap.
8. Remove the screws retaining the heater core cover.
9. Remove the heater core cover.
INSTALLATION PROCEDURE
1. Install the heater core cover.
2. Install the heater core cover retaining screws.
Tighten the screws to 0.9 N.m (8 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the I/P harness to heater core cover tie strap.