Rendezvous FWD V6-3.5L VIN L (2006)
7. Remove the radiator upper mount bolts (1).
8. Remove the radiator upper mounts.
9. Remove the cooling fan shroud bolts.
10. Reposition the coolant overflow hose clamp at the radiator using the J38185.
11. Disconnect and reposition the coolant overflow hose.
12. Disconnect the upper TOC line from the radiator.
13. Raise the vehicle. Refer to Vehicle Lifting.
14. Disconnect the TOC lines from the fan module retainer clip.
15. Lower the vehicle.
16. Disconnect the engine wiring harness retainers at the engine harness bracket.
17. Reposition the engine wiring harness.
18. Remove the cooling fans with the cooling fan shroud.
Installation Procedure
