Rendezvous FWD V6-3.5L VIN L (2006)
Notice: Use only the recommended tools for separating the ball joint from the knuckle. Do NOT hammer or pry the ball joint from the knuckle.
Failure to use the recommended tools may cause damage to the ball joint and seal.
9. Install the J41820 over the ball stud nut and steering knuckle as shown.
10. Rotate the ball stud nut counterclockwise in order to separate the ball stud from the steering knuckle.
11. Remove the air conditioning (A/C) compressor bolts and position the A/C compressor aside.