Rendezvous FWD V6-3.5L VIN L (2006)
15. Install the generator bracket.
16. Install the EGR valve.
17. Install the ignition coil.
18. Install the thermostat bypass pipe.
19. Install the PCV foul air tube.
20. Position the PCV foul air tube clip.
21. Install the PCV foul air tube bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).
22. Connect the spark plug wires to the ignition coil.
23. Install spark plug wire harness clips to the following:
^
Ignition coil bracket
^
Spark plug wire support
^
Coolant bypass pipe
24. connect the spark plug wires to the spark plugs.
