Rendezvous FWD V6-3.5L VIN L (2006)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seal Replacement
Tools Required
^
J35468 Cover Aligner and Seal Installer
Removal Procedure
1. Remove the crankshaft balancer.
2. Pry out the crankshaft front oil seal using a suitable tool. Use care not to damage the engine front cover.
Installation Procedure
1. Align the J35468 and the crankshaft front oil seal with the engine front cover and crankshaft.
2. Install the crankshaft front oil seal using the J35468 and a suitable tool.