Rendezvous FWD V6-3.5L VIN L (2006)
10. Remove the exhaust manifold nuts.
11. Remove the exhaust manifold.
12. Remove and discard the exhaust manifold gasket.
13. Clean the exhaust manifold sealing surfaces.
Installation Procedure
1. Install a NEW exhaust manifold gasket onto the studs
2. Install the exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust manifold nuts.
Tighten the nuts to 16 Nm (12 ft. lbs.).