Rendezvous FWD V6-3.5L VIN L (2006)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Right
AIR TEMPERATURE ACTUATOR REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) compartment.
2. Disconnect and remove the right hand temperature door lever spring (2).
3. Disconnect and remove the right hand temperature lever (1) from the right hand temperature door.
4. Disconnect the right hand temperature actuator electrical connector.
5. Remove the right hand temperature actuator mounting screws.
6. Remove the right hand temperature actuator.
INSTALLATION PROCEDURE
1. Install the right hand temperature actuator.
2. Install the right hand temperature actuator mounting screws.
Tighten the screws to 1.6 N.m (14 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
