Rendezvous FWD V6-3.5L VIN L (2006)
Hose/Line HVAC: Service and Repair
Evaporator Tube Replacement - Outlet
EVAPORATOR TUBE REPLACEMENT - OUTLET
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Remove the air cleaner assembly.
2. Disconnect the cruise control module electrical connector.
3. Reposition cruise control module aside.
4. Remove the cruise control module mounting bracket bolts.
5. Remove the cruise control module mounting bracket.
6. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging.
7. Remove the wiper motor module.
8. Remove the evaporator outlet tube to TXV nut.
9. Disconnect the evaporator outlet tube from the TXV.
10. Disconnect the evaporator inlet tube from the evaporator outlet tube.
11. Cap or tape off the TXV.
IMPORTANT: Cap or tape off the open A/C components immediately to prevent system contamination.
12. Remove the evaporator outlet tube bracket bolt.
