buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Arming and Disarming|Page 16225 > < Arming and Disarming|Page 16223
Page 2
background image

4. Install the SIR Fuse.
5. Install the console accessory wiring junction block access hole cover. 
6. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
7. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System

Check - Vehicle.  See: Testing and Inspection/Initial Inspection and Diagnostic Overview

Arming and Disarming|Page 16225 > < Arming and Disarming|Page 16223